Montagekit^® Polystyrene

Preparation

Working Conditions: Do not use at temperatures below +5°C.
Tools: Use sealant gun (e.g. Bison Click Gun) to handle cartridge. A rubber mallet may be used to tap. Use a glue spreader (2 mm) for surface bonding.

Application

Coverage: Wall covering boards and panels: approx. 5-8 m²/kg depending on weight of material. Laths, skirting boards and timber framework: approx. 4-6 m²/kg bonded surface.
Product Preparation: Before use, open cartridge by cutting off plastic nipple above screw thread with a sharp knife. Attach nozzle to cartridge and cut it slantwise (opening at least Ø 5 mm).
Directions for use: Apply adhesive evenly in dots or lines every 20-30 cm, depending on weight of material. Always apply adhesive in corners and along edges. In case of surface bonding, apply adhesive thinly and evenly to one side, using a glue spreader. Join parts immediately with a sliding movement and press or tap firmly. Adjustments can still be made. If necessary, secure or support heavy materials.
Stains/Residue: Remove fresh stains immediately with water. Dried adhesive residue can only be removed mechanically.
Advice: For bonding polystyrene to a non-porous surface, we advise Bison Poly Max^®. For bonding polystyrene in areas with a permanently high humidity level and/or areas exposed to long-lasting contact with water, use Bison Poly Max^®.

Cure times

For detailed information about the cure times, see the Technical Documentation.